Fort Worth, TX - According to Debby Davis, a floor care expert with Powr-Flite, manufacturer of professional cleaning equipment, her company receives more questions and "more requests for help" regarding floor care issues than any other cleaning task.

Because of this, this month's Powr-Flite Troubleshooter focuses on some of these common questions  along with her answers.

I put several coats of finish on a floor but now there is more marking from foot traffic than before. What happened?

Invariably this is caused by too many coats of finish put on too quickly. When this happens, it usually means that some coats did not thoroughly dry (cure), which trap  s moisture between the coats. Place a tissue under your foot and twist it into the floor. If it does not stick or tear, the finish is dry.

One of the floors we recently refinished is receiving complaints about static electricity. Did we cause this?

Whether you caused this or not, I cannot be sure. However, some static electricity problems can develop as a result of the types of shoes workers wear when refinishing the floor. Wear leather soled shoes and try to raise the humidity in the facility since dry air can also cause static electricity. Also, clean the floor using an antistatic cleaning solution.

What exactly is a floor shine?

Many cleaning contractors are surprised to know that a shine is really caused by the reflection of light off the floor. A very clean, evenly applied finish will reflect light that makes the shine. However, with foot traffic and time, the finish can become worn down, uneven, or soiled. This affects the reflection of light, making the floor look dull.

Why did so many of my floors "grey out" this past winter?

This past winter was harsh in many areas of the country. Ice melt, sand, and moisture that are walked in to the facility and tracked on the floors soften the finish. It is now easier for the floor to collect soil and, as this happens, the floor begins to grey out 

If you have questions regarding floor care issues, Powr-Flite invites cleaning professionals to contact them via its website.

###

The Powr-Flite Troubleshooter addresses some of the most common floor care problems cleaning professionals encounter ... and, most importantly, how to tackle them.

About Powr-Flite 

Established more than 40 years ago, Powr-Flite manufactures a full line of floor-care equipment and carpet extractors for the professional cleaning industry. Based in Fort Worth, TX, the company has over 20 patented designs and its products are recognized throughout the world for their innovation, durability, quality and performance. Their products are marketed directly to end-use customers as well as through distributors throughout the North America, Europe and the Far East.

Company Contact Information:

Powr-Flite 

Zack Smith Marketing Director

z.smith@tacony.com 

800.880.2913

3101 Wichita Court

Fort Worth, TX  76140